In case of long‐term storage, it is advised to turn on the camera
every now and then to check its operational state.
Please avoid splashing the camera with water; no object
•
containing liquid must be placed on the device.
Make sure that no liquid spills into the openings of the unit.
•
Move the unit carefully and avoid shocks.
•
Do not block ventilation openings with objects such as
•
newspapers, tablecloths, curtains, etc.
Do not install the unit near a heat source (such as a radiator) and
•
do not expose it to direct sunlight.
Do not place the unit near any open flame, such as lit candles.
•
To avoid static electricity, do not use the camera in a very dry
•
environment.
Connect the connecting cables as instructed in the guide.
•
Turn off the power before inserting or removing a memory card.
•
Charge the built‐in battery when the battery icon flashes, or if the
•
camera turns off automatically.
Never attempt to open or modify the unit yourself: please refer
•
to qualified service professionals for servicing and repair.
Please use only recommended accessories: the use of power
•
sources other than those specifically recommended may cause
overheating, deformation of materials, fires, electric shocks, etc.
Never unplug the camera during a formatting or data‐transfer
•
operation to prevent damage or loss of data.
When used in USB mode, data transfer procedures must be
•
strictly applied. Incorrect handling may result in loss of data, in
which case the manufacturer shall not be liable.
Do not expose the battery to excessive heat, such as sunlight,
•
fire, radiator or similar sources.
27