Installation Instruction - Wellis DITTE Manuel D'installation

Installation Notice:
EN
1. Water must be turned off at main supply before you begin installation
2. Never use cement or plaster to fix or seal the water closet on the floor because rigid
materials used can expand while hardening and may cause ceramic to break.
3. Do not over tighten closet nuts as you may crack the base of the toilet and bolt caps
may pop off.
4. Do not over tighten the toilet fill valve water supply nut, this way may cause leakage.
Tools (not included)
Flat Screwdriver
Spanner

Installation Instruction

Install the Seat cover onto the Toilet Pan following the seat cover installation manual
which included in the seat covers you have received.
Drilling machine
Spirit level
Silica gel
Tape measure Pencil