Identification; Unit Identification; Delivery Contents - Endress+Hauser iTEMP RTD TMT 187 Mise En Service

Temperature head transmitter

Unit identification

Delivery contents

H
2

Identification

2.1 Unit identification
Compare the legend plates on the head transmitter with the following figures:
Fig. 1: Head transmitter legend plate (e. g. for TMT 187 - Type identification for TMT 188:
TMT 188-A iTEMP TC)
Fig. 2: Order code (e. g. for TMT 187)
Fig. 3: Identification for hazardous area use (only for Ex certified units)
CE-marks, conformity description
The unit has been manufactured using up-to-date production equipment and has left
our works in perfect and safe condition. It complies with the safety requirements to
EN 61 010.
The unit described in these instructions therefore fulfils the legal requirements set by the
EU guide lines. The manufacturer confirms a positive completion of all tests by fitting the
unit with a CE mark.
2.2 Delivery contents
The delivery contents of a temperature head transmitter are as follows:
• Head transmitter
• Installation screws and springs
• Operating instructions
• ATEX-operating instructions for use in hazardous areas
Hint!
Please take note of the head transmitter accessories in chapter 8 "Accessories".
2 Identification
23