Midea MLH52N4AWW Manuel page 26

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CLEANING THE PUMP FILTER
Due to the nature of the front-load washer, it is sometimes possible for
small articles to pass to the pump. The washer has a filter to capture lost
items so they are not dumped to the drain. To retrieve lost items, clean out
the pump filter.
1. Using a coin or flat screwdriver in the notch on the door, open the
access door.
2. Place a shallow pan or dish under the pump access door and towels on
the floor in front of the washer to protect the floor. It is normal to catch
about a cup of water when the filter is removed.
3. Pull down the pour spout.
26
Pump lter
Pour
spout

Publicité

Chapitres

Table des Matières
loading

Table des Matières