Midea MLH52N4AWW Manuel page 19

You can delay the start
DELAY of a wash cycle for up to
24 hours. Press the Delay
Wash button to choose
the amount of time you
want to delay the start of
the wash cycle. Once the
desired time is reached,
press the
machine will count down
and start automatically at
the correct time.
Press to start a wash
cycle. If the washer is
running,pressing it once
will pause the washer.
Press again to restart the
wash cycle.
If you want add a
garment,please press the
button.
The washer will unlock the
door. Press again to restart
the cycle.
Displays the approximate
Display
time remaining until the
end of the cycle.
NOTE: The cycle time
is affected by the water
pressure in your home and
the balance of the load
in the washer. You may
see the time remaining
on the display increase to
accommodate a slower
spin speed to handle
unbalanced loads.
C D
button. The
B A
NOTE: If you forget to close
the door, a double beep will
sound when pressing
pause/add garment button.
NOTE: If you open the door
when the delay is counting
down, the machine will
enter the pause state.
You must close the door
and press
again in order to restart
the countdown.
NOTE: In some cycles the
washer will drain first,then
unlock the door when it is
paused.
NOTE: The washer
performs automatic system
checks after pressing the
button.
You may hear the door lock
and unlock before water
flows, this is normal.
Cycle status is also
displayed and certain
features such as Delay
Wash or Steam are shown
indicating they have been
selected.
Display
A
Wash Time
End
Remain-Delay
B
Child Lock
C
Pre
-
Door Lock
D
button
Delay Time
Error
19