PEUGEOT EnergyGrind-150TA Manuel D'utilisation page 22

All manuals and user guides at all-guides.com
7. Keep visitors and children away from the machine and make sure they stay at a safe distance from the wor-
king area.
8. Protect the working area from entry by unauthorised persons. Place locks on the doors or padlock the main
switch in order to avoid starting up by children.
9. Make sure that the machine is not overloaded by the job. Efficiency is improved and safety is better assured
when the machine is used within its capacity limits.
10. Do not use the machine for work other than that for which it is designed.
11. Wear appropriate work clothing. Avoid loose clothes, gloves, scarves, rings, necklaces, chains and other
jewellery that could be caught by moving parts. Wear non-skid safety shoes.
12. Always wear protective goggles and a dust mask whenever required. Follow the occupational injury preven-
tion guidelines.
13. Always clamp the work piece in a vice or a clamping device. Manual holding leads to risks and it is better to
leave both hands free for using and handling the machine.
14. Take up a position where your body is stable (position of feet, balance).
15. Keep the machine in good condition. Keep the cutting edges clean and sharp in order to make the most of
all the capacities of the machine. Follow the instructions for use when cleaning, lubricating and replacing tools.
16. Disconnect the mains plug before carrying out any maintenance work or before replacing components such
as saw blades, drill bits, cutting tools, etc.
17. Only use the recommended accessories and follow the instructions given in that regard in the instructions
for use. The use of accessories that are foreign to the system leads to injury hazards.
18. Avoid unintentional starting up. Every time you connect the machine to the mains, always check first that
the machine is switched off.
19. Never climb onto the machine. Very serious injury can result from tipping over or contact with the cutting
tool.
20. Check the machine for any defects. Damaged parts or protective systems must be correctly repaired or
replaced before continuing the work.
21. Never let a machine run unattended. Always cut off the mains power supply and do not leave the machine
before it has come to a complete halt.
22. Never work with machines when under the effect of alcohol, certain medication or drugs.
23. Make sure that the power is switched off before working on the electrical parts, drive motor, etc.
22