Intended Use; Safety Instructions - Black & Decker BDPR400 Mode D'emploi

ENGLISH

Intended use

Your Black & Decker Speedy Roller
applying paint to walls and ceilings. This appliance is intended
for indoor household use only.

Safety instructions

@
Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in injury.
Read all of this manual carefully before using the appli-
u
ance.
The intended use is described in this manual. The use of
u
any accessory or attachment or the performance of any
operation with this appliance other than those recom-
mended in this instruction manual may present a risk of
personal injury.
Retain this manual for future reference.
u
Using your appliance
Never put descaling, aromatic, alcoholic or detergent
u
products into the speedy roller, as this may damage it or
make it unsafe for use.
After use
When not in use, the appliance should be stored in a dry
u
place.
Children should not have access to stored appliances.
u
Inspection and repairs
Before use, check the appliance for damaged or defective
u
parts. Check for breakage of parts, damage to switches
and any other conditions that may affect its operation.
Do not use the appliance if any part is damaged or defec-
u
tive.
Have any damaged or defective parts repaired or
u
replaced by an authorized repair agent.
Never attempt to remove or replace any parts other than
u
those specified in this manual.
Safety of others
This appliance is not intended for use by persons (includ-
u
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern-
ing the use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not
u
play with the appliance.
6
(Original instructions)
has been designed for
TM
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any moving parts.
u
Injuries caused when changing any parts or accessories.
u
Injuries caused by prolonged use of the appliance. When
u
using any appliance for prolonged periods ensure you
take regular breaks.
Labels on the appliance
The following pictograms are shown on the tool:
:
Warning! To reduce the risk of injury, the user
must read the instruction manual.
&
Warning! Only use non-flamable liquids.
Warning! Keep bystanders away.
6
Warning! Wear a dust mask.
O
Warning! Wear safety glasses.
Features
This appliance includes some or all of the following features.
1. Plunger
2. Trigger
3. Paint resevior
4. Kick stand
5. Fill valve
6. Head rotation button
7. Roller head
8. Roller
9. Drip tray
Assembly
Attaching the handle (fig. A)
Slide the handle (10) into the paint reservoir (3) ensuring
u
that the orange collar (11) meets the handle (3).
Thread the orange collar (11) onto the threads of the
u
handle (3) and tighten.