Residual Risks; Power Cord Replacement - Ferm CDM1113S Traduction De La Notice Originale

b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
For the charger
Intended use
Charge only 14.4V or 18.0V MAX 1.5Ah Li-ion
type rechargeable battery packs. Other types of
batteries may burst causing personal injury and
damage.
a) The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
b) Children being supervised not to play with
the appliance
c) Do not recharging non-rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!

Residual risks

Even when the power tool is used as
prescribed it is not possible to eliminate all
residual risk factors. The following hazards
may arise in connection with the power tool's
construction and design:
6
All manuals and user guides at all-guides.com
a) Health defects resulting from vibration
b) Injuries and damage to property to due to

Power cord replacement

If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Mains plug replacement (UK plug of charger
only)
If the molded 3-pin plug attached to the unit is
damaged and needs replacing, it is important
that it is correctly destroyed and replaced by
an approved BS1363/5A fused plug and that
the following wiring instructions are followed.
The wires in the mains cable are colored in
accordance with the following code:
• blue
• brown
As the colors of the wires in the mains cable of the
unit may not correspond to the colored markings
identifying the terminals in the plug, proceed as
follows:
• T he wire which is colored blue must be
• T he wire which is colored brown must be
emission if the power tool is being used
over longer period of time or not adequately
managed and properly maintained.
broken accessories that are suddenly dashed.
Warning! This power tool produces an
electromagnetic field during operation.
This field may under some circumstances
interfere with active or passive medical
implants. To reduce the risk of serious or
fatal injury, we recommend persons with
medical implants to consult their
physician and the medical implant
manufacturer before operating this
power tool.
neutral
live
connected to the terminal which is marked
with the letter N or colored black.
connected to the terminal which is marked
with the letter L or colored red.