Hoover H-WASH 300 PRO Mode D'emploi page 59

Instructions for mounting the
furniture door
Position the template onto the

reverse of the furniture door. It
is possible to mount the hinges
and closure magnet on the right
or left-hand side depending on
your requirements. Mark the
screw hole positions, then drill
out these positions.
Fix the hinges in place with the

4 screws provided (A).
Fix the magnet (B) in place

using screw (C).
Mount the plate (D) on the right

or left-hand side, depending on
your installation requirements.
Place the plastic support (E)
under the plate and fix it in
position with screw (F).
Snap mount cap (G) in the

lower position.
59