Stryker IsoTour Pump Mode D'emploi page 21

T T r r o o u u b b l l e e s s h h o o o o t t i i n n g g
P P r r o o b b l l e e m m
Kinked air hoses
Missed connection with air
hoses
Power loss, product does
not turn on
Power loss, while T T r r u u T T u u r r n n
is in use
Button not responsive
2874-009-001 Rev AA.0
S S c c r r e e e e n n
29:59
C C a a u u s s e e
Air hose is bent or an
obstruction in the hose may
cause air flow to be
compromised
T T r r u u T T u u r r n n was attempted but
you have a standard model
(bottom cover is orange)
Air hoses are not connected
to the pump or the support
surface
Power cord not seated,
power cord unplugged from
outlet, or possible internal
damage, button is stuck
Unintentional or intentional
power loss
Lock function active, button
is stuck
R R e e c c o o m m m m e e n n d d e e d d a a c c t t i i o o n n
1. Make sure that the hoses
are straight and air flow is
not obstructed.
2. Press the action button
next to the Alarm off icon
to reset the pump.
Contact sales support for
T T r r u u T T u u r r n n option.
1. Make sure that the hoses
are seated all the way
onto the hose ports on
the pump or the support
surface.
2. Press the action button
next to the Alarm off icon
to reset the pump.
1. Make sure that the power
cord is plugged into the
product and the outlet.
2. Secure the power cord to
the flex grip. See
Connecting the power
cord .
3. Replace the LCD screen.
1. Pull the hose from the
pump or the support
surface to activate CPR.
The bladder deflates and
returns the support
surface to a flat position.
1. Press and hold the action
button next to the locked
icon for 2 seconds to turn
off the lock.
2. Replace the LCD screen.
3. Power cycle the pump.
17 EN