R-Go HE-Mouse Mode D'emploi page 6

register the new device driver for the HE-Mouse
automatically.
-For Windows98: plug your HE-Mouse into the
USB port, then switch your computer off and on.
-For Windows98 users: download and install the
USB device driver from Microsoft in order to
get a proper USB connection.
-Other than MS Windows, the forward and
backward buttons in OS probably will not work
properly.
The HE-Mouse doesn't use its own specific driver.
It works just as easy as a standard mouse.
7. Operation
After plugging in the USB cable or USB receiver
(wireless version) into your computer the mouse
can be used normally. The HE-Mouse has a
vertical grip which provides a neutral, relaxed
position of the hand and wrist. The HE-Mouse
should be moved from the whole instead of the
wrist, which prevents RSI. The battery of the
wireless version can be charged by the separately
supplied USB cable. During charging the mouse
can be used normally (assure that you have
installed the USB-receiver on your computer).
The picture below shows the HE-Mouse, its
buttons, and functions:
1.Left button
2.Right button
3.Scroll wheel
4.Forward button
5.Backward button
6.Lip for last finger