Removing The Seat Cover; Maintenance And Cleaning - Teamtex MIRAGE EASY Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
EN

10 - REMOVING THE SEAT COVER

10.a Removing the headrest covers by pulling the cover
forward and off.
10.b Removing the wings by pulling the cover forward
and off.
10.c Departing the backrest from the base by making
the seat flat and detach the connection opint of the two
parts
10.d Removing the base by pulling the cover forward
and off.
11 - REPLACING THE SEAT COVER
11.a Sliding the base cover onto each armrest, and then
pull the cover over the front and down around the back
of the base.
11.b Mounting the backrest by connecting opint of the
two parts.
11.c Sliding the cover down, over each side impact sys-
tem to secure the edge of cover is in the gap of the wings.
11.d Sliding the headrest cover over the headrest to
secure the edge of cover is in the gap of the headrest.

MAINTENANCE AND CLEANING

STORAGE
1) Store this child car seat in a safe place when not in use.
2) DO NOT place heavy objects on top of it.
3) Always store the child car seat in a dry environment.
4) DO NOT store the child car seat near a direct heat
24
source such as a radiator.
IM 2013,01 TORNADO_IFIX ins OK.indd 24
COVERS
1) The seat cover is easily removable and should be
handwashed with a pH neutral soap and cold water.
2) Do not press, iron, dry clean, tumble dry or wring the
covers.
3) Do not use solvents, caustic or abrasive cleaning materials.
4) Dry flat, away from direct heat and sunlight.
5) If the seat covers need to be replaced only use certified
parts. They are the only ones that are guaranteed to have
been safety tested and designed to fit this seat.
PLASTIC/METAL PARTS
1) Wipe clean using a mild soap and warm water.
2) You must not remove, dismantle or alter any part of the
seat shell.
3) You must not oil or lubricate any part of the seat shell.
INSPECTION
1) Check your child car seat regularly for wear and tear.
2) The child car seat may have a slight rattle when not in
use, this is normal. If in any doubt, contact us immediately.
3) Check the adjustable parts of your child seat at intervals
of about 6 months to ensure it is still fits correctly for your
growing child.
19/6/18 19:24

Publicité

Table des Matières
loading

Table des Matières