as possible to the backrest of the car seat.
Warning: REMOVE the headrest of the passenger
seat being used if it obstructs the proper installation
of the child car seat. REMEMBER to refit the head-
rest when the child car seat has been removed.
SECOND HAND OR DAMAGED CHILD
CAR SEATS AND SEAT BELTS
Warning: Never buy a second hand child car seat.
It may have unseen damage.
Warning: The manufacturer only guarantees this
product when the original owner uses it.
Warning: You MUST replace the child car seat and
your vehicles seat belts if they becomes badly worn
or damaged.
Warning: You MUST replace the child car seat if
it is involved in an accident – it may have unseen
damage and may not protect your child as well as
it should.
At the very least send the child car seat to the
manufacturers for inspection, together with the
incident report.
IM 2013,01 TORNADO_IFIX ins OK.indd 21
INSTRUCTIONS FOR ASSEMBLY AND USE
POSITIONING THE SEAT
The child car seat can only be used with an
automatic 3-point safety belt (A) and NOT with a
2-point lap belt (B).
The child car seat can be secured in a forward-facing
position in the rear seats of the vehicle by using the existing
seat belts. However, on some seats, if the installation is not
properly secured, we suggest you try another seat in your
vehicle.
Although not recommended, the child car seat can be used
on a passenger side front seat, so long as there is no active
airbag in place.
WARNING: Never use in a seat with an active airbag.
1 - USE CATEGORY
2.a Universal category
Installation with the vehicle's seat belt
• The child is secured with the car's safety belt.
• The infant car seat is only testing against the car seat.
2.b Installation with the vehicle's seat belt and Isofix
connectors
• The child is secured with the vehicle's seat belt.
• The infant car seat is secured to the vehicle with the
two rear isofix connectors.
EN
21
19/6/18 19:24