Installing The Wall Mount - NEC LED-A019i Manuel D'installation

Installing the Wall mount

For NEC Qualified Personnel:
Before mounting the LED Poster to a wall, make sure that the wall is strong enough to support the
weight of the LED Poster and the brackets.
Damage caused by incorrect installation, modifications or natural disasters is not covered by the
warranty.
The warranty may be voided if the recommendations above are not observed.
Do not obstruct the vents with the mounting bracket or another part.
Wall
NOTE: The screws used to fix the wall mount bracket to the wall are not supplied.
NOTE: • ONLY use Wall mount bracket fixing screw which are included in the LED Poster.
• The tightening torque range is 275 N•cm to 314 N•cm.
Wall LED Poster
NOTE: Ask your retailer if you want to install the product using a means other than the pedestal stand,
the hanging plate or the wall mount bracket.
English-10