NEC LED-A019i Manuel D'installation page 18

Important Information
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD
RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED
FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE
DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have sufficient
magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact
with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and
maintenance of this unit has been included. Therefore, it should be read carefully in order to
avoid any problems.
CAUTION: Please use the power cord provided with this equipment in accordance with the table
below. If a power cord is not supplied with this equipment, please contact NEC. For
all other cases, please use the power cord with the plug style that matches the power
socket where the equipment is located. The compatible power cord corresponds to the
AC voltage of the power outlet and has been approved by, and complies with, the safety
standards in the country of purchase.
This equipment is designed to be used in the condition of the power cord connected
to earth. If the power cord is not connected to the earth, it may cause electric shock.
Please make sure the power cord is earthed properly.
Plug Type
Plug Shape
U.S.A./
Region
Canada
Voltage 120*
* When operating this equipment with its AC 125-240V power supply, use a power supply cord that matches
the power supply voltage of the AC power outlet being used.
NOTE: This product can only be serviced in the country where it was purchased.
Use the power cord which has BSMI mark at both ends when you use this equipment in Taiwan.
WARNING
CAUTION
North America
Taiwan
110
European Continental
EU
230
English-2
U.K. Japanese
U.K. Japan
230 100