Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Setting degrees Fahrenheit (F) or Celcius (C)
1 Press Menu.
2 Press
or
to go to F / C. Press Select.
3 Press
or
to select F or C. Then press
Select.
4 Press Home to return to the home screen.
Adjusting keypad lockout
1 Press Menu on the thermostat.
2 Press
or
to go to LOCK. Press Select.
to go to OFF, PART, or ON, and then press Select.
3 Press
or
OFF: Unlocked, and full access allowed.
PART: Partial lockout, allowing only the temperature to be changed.
ON: No access allowed.
4 To unlock the keypad, press the CENTER button and then enter the password
"1234". To enter the password, press
number. Then press Select. Repeat this process to enter the second through
fourth digits of the number. Once all four numbers have been entered, press
Select again.
5 This will unlock the keypad.
6 If the code is incorrect, the screen will flash the lines "--".
7 Press Back to go back a step to enter the correct number and press Select.
NOTE: On some models, the keypad lockout setting is only available in the
installer menu and not available in the user menu.
Adaptive Intelligent Recovery
Over time, the
Resideo
to reach the temperature you want. It turns on the heating system earlier to make
sure you're comfortable at the time you expect.
T6 Pro Thermostat "learns" how long it takes your system
or
to change the first digit of the
7
Publicité
Table des Matières
