Micro MERLIN Traduction De La Notice Originale page 24

Setting of the riding programs
You can change between the individual riding programs with the following action:
1. Press the thumb brake (left side) and keep it pressed
2. Turn on the scooter
3. Press the thumb accelerator (right side) one to four times in succession to active the
programs (1 = Pedestrian mode, 2 = Eco mode, 3 = Standards mode, 4 = Sport mode)
To see the program activated, ride the scooter.
Display interface and functions
The following illustration shows the different positions on the display.
● The number (1-3) at the top of the screen shows the current speed level.
● On the top right corner you can find the temperature indication.
● The large numbers in the center show the current speed.
● The battery icon on the left and the percentage number displays the current state of
charge of your battery.
● The bottom area displays the current trip distance (TRIP) or the total mileage (ODO)
respectively.
- In order to switch between TRIP and ODO, press the 'M' button shortly.
- In order to set the TRIP distance to zero, press the 'M' button for three seconds.
EN
24
NOTE
Light
The electric scooter is not approved for
general use on public roads. Please note
that each country has specific regulations
and restrictions for electric vehicles in road
traffic (especially in terms of maximum speed,
performance and authorised roads). Please
inform yourself about the applicable guidelines
for your country in person and in detail.
M' On/Off