Removing And Installing Lower Plate - Panasonic MC-UG729 Manuel D'utilisation

Masquer les pouces Voir aussi pour MC-UG729:
Table des Matières

Publicité

WARNING
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Electrical Shock or Personal Injury Hazard

Removing and Installing Lower Plate

Latches
Lower Plate
Taquets
P
laque
Pestillos
inférieure
Base inferior
➢ Before servicing any parts,
disconnect vacuum cleaner from
electrical outlet.
➢ Always place paper under nozzle
whenever lower plate is removed to
protect floor.
➢ Place body in upright position and
turn vacuum cleaner over to expose
lower plate.
➢ Release lower plate by rotating the
lower plate latches to the UNLOCK
position.
➢ Remove lower plate and remove any
residue that may exist in belt area.
➢ Reinstall lower plate by hooking
front end of lower plate into slots on
front of nozzle.
➢ Press lower plate onto nozzle and
secure by rotating the lower plate
latches to the LOCK position.
- 44 -

Publicité

Table des Matières
loading

Table des Matières