Hendi 281376 Mode D'emploi page 7

Power Up
When plug into the socket, --- will be shown on the
display. It will disappear in 1 minute of inactivity.
Idle Mode
During idle mode, the screen is blank and there will
be no oven activity. Opening and then closing the
oven door will activate the ready mode. The oven will
Ready Mode
Opening and closing the door while the oven is in
Idle Mode will put the oven into Ready Mode. In this
mode, the oven is ready to either begin a manual or
Door Open Mode
Door open mode is activated by opening the door.
During this mode, the screen is blank. And the fan
and oven lamp work. When the oven was working
Manual Entry
Make sure the microwave is under "READY" mode.
Select the time with the '
show "00:00", select the requested time with the
number keyboard. After that, select the power lev-
el. Press ' ' first and then select the power level
with the number keyboard as shown in below table
(Defrost /10%/20%/30%/40%/50%/60%/70%/80%/90
%/100%), The display will show the selected power.
Pause Mode
This mode allows users to pause the cycle to inspect
or stir the food. While the microwave is operating
open the door or press the 'pause' button to pause
the cycle. The display will show the remaining time.
Run program mode
This microwave comes with preset programs. When
the microwave is in 'ready mode' press one of the
number keys and the microwave will run the pro-
gram. Below you'll find the preset programs. When
Button 1
Display (Time) 0:10
Power 100%
All manuals and user guides at all-guides.com
' button, the display will
2 3 4
0:20 0:30 0:45
100% 100% 100%
Then, this microwave will enter into the Idle Mode.
enter idle mode after a minute of no use, The time it
takes to activate idle mode can be changed with the
'user options' (Option 4, Timeout Window).
preset cooking cycle. During Ready Mode, "READY"
displays. From the Ready Mode, the oven can go to
almost all of the other modes.
when the door was opened the program will be
paused.
If you press again the same power level button, the
power will be back to set 100% power. Also, if no
power level button is set, the power will be default to
100%. When everything is set press the 'u' button,
now the microwave will start operating. At the end
of the cycle the display will show 'DONE' and beeps
will be heard until the microwave is opened or the
'pause' button is pressed.
To resume the cycle, close the door and press the
'start' button. When nothing is done the microwave
will go into idle mode.
operating the microwave shows the remaining time
in the display, when it's a multi-stage program the
total remaining time will be displayed.
5 6 7
1:00 1:30 2:00
100% 100% 100%
8 9 0
2:30 3:00 3:30
100% 100% 100%
7
EN