Hendi 281376 Mode D'emploi page 14

Trouble shooting
The following events can be considered as normal
effects of working with this microwave.
• Radio and TV reception may be interfered when the
microwave is operating.
Trouble
Microwave doesn't start working
Oven doesn't heat
The display shows 'E-01' or 'E-02'
The display shows 'OVEN IS HOT DO
NOT OPEN THE DOOR'
EN
Light and fan make noise when the
microwave finished operating.
Warranty
Any defect affecting the functionality of the appli-
ance that becomes apparent within one year after
purchase will be corrected by free repair or replace-
ment provided the appliance has been used and
maintained in accordance with the instructions and
has not been abused or misused in any way. Your
statutory rights are not affected. If the appliance is
claimed under warranty, state where and when it
Discarding & Environment
At the end of the life of the appliance, please dispose
of the appliance according to the regulations and
guidelines applicable at the time.
14
All manuals and user guides at all-guides.com
Possible cause
Power cord not plugged in correctly.
Fuse blown of circuit breaker active.
Power outlet defective
Door not closed correctly
Temperature sensor broken
Warning is activated by the high
temperature in the chamber.
High temperatures.
• The light of the oven might be dimmed when op-
erating.
• During heating steam can come from the food and
can accumulate on the cooler parts of the micro-
wave like for instance on the door.
Solution
Check if the power cord is plugged
in correctly.
Replace fuse or reset circuit breaker.
If not sure how to do this contact
your supplier.
Test outlet with other appliance and
check circuit breaker.
Check the door if it closes properly,
if it can't be closed properly contact
your supplier.
Unplug the microwave from the
power outlet and wait 10 seconds
before plugging the power cord back
in. If the problems isn't solved after
this contact your supplier.
Wait 3 minutes, the microwave will
cool down. Check is the vents are
clear. Never use the microwave
without food in it, don't overheat
food. If the problem isn't solved after
these steps contact your supplier.
This is normal, the lamp and fan
stop when the microwave has cooled
down enough. If they don't stop
working unplug the microwave from
the power socket and wait 10 se-
conds before plugging back in. If this
doesn't solve the problem contact
your supplier.
was bought and include proof of purchase (e.g. re-
ceipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Throw packing materials like plastic and boxes in
the appropriate containers.