Airxcel RVP 8000 Serie Instructions D'installation page 5

All manuals and user guides at all-guides.com
If the roof of the vehicle is sloped (not level) such
that the roof top air conditioner cannot be
mounted within the maximum allowable degree
deviations, an exterior leveling shim will need to
be added to make the roof top air conditioner
level. A typical leveling shim is shown in
Figure 4.
E. After the mounting hole area is properly prepared,
remove the carton and shipping pads from the roof
top air conditioner. Carefully lift the unit to the
top of the vehicle. Do not use the outer plastic
shroud for lifting. Place the roof top air
conditioner over the prepared mounting hole. The
pointed end (nose) of the shroud must face
towards the front of the vehicle. Pull the electrical
conduit down from the roof air conditioner
through the mounting opening and let hang.
5