Mstation 2.1 Stereo Tower Guide De L'utilisateur page 9

All manuals and user guides at all-guides.com
Audio Device Operation
To operate your mStation Tower™ with an audio device connected to the Line In jack,
such as an iPod without a dock connector, portable MP3 or CD player, computer, etc.,
follow the steps outlined below:
1. Press the Standby/On button on the mStation Tower™ or the Remote Control. The
Status Indicator light will turn blue.
2. Turn on the connected audio source and operate it using the device's own controls.
3. Use the Volume Control buttons on the mStation Tower™ or Remote Control to set
the desired listening level. If the audio device has its own volume control you might
need to adjust it as well.
When listening to a device connected to the Line In jack, only the Standby/On, Volume,
Bass and Treble control buttons on the Remote Control or mStation Tower™ will
function. If your audio device has its own volume control, you may need to adjust it,
together with the volume controls of the mStation Tower™, to prevent distortion during
playback. Control of the audio device is performed using the device' s own controls.
4. When you are finished listening, stop the audio device and turn it off using its own
controls.
5. Press the Standby/On button on the mStation Tower™ or Remote to return it to
Standby mode. The Status indicator light will turn amber.
An iPod connected to the using the Line In jack cannot be controlled by either
the mStation Tower' s ™ control buttons, or by a computer connected to the
mStation Tower' s ™ USB jack.
Remember, when a device is connected to the Line In jack of the mStation Tower™,
playback from other devices connected to the docking port or USB jack is disabled. To
enable playback of these devices, you will need to disconnect the mini plug cable from
the mStation Tower™.