Speakers - Coby DVD968 Manuel D'instructions

Connections

Speakers

This unit has an integrated amplifier. Connect the supplied speakers to
enjoy your movies with 5.1-channel surround sound!
1. If necessary, strip 3/8" (10 mm) of insulation from each end of the
speaker wire.
2. While pressing the terminal levers of each speaker, insert the bare
wire into the hole, then release the lever to secure the connection.
3. While pressing the speaker terminal levers of the unit, insert the bare
wire into the hole, then release the lever to secure the connection.
4. The speaker wire and terminal for each speaker is color-coded for
your convenience. The following table will help you match the
speakers to their proper terminal:
Terminal
SW
CEN
SR
SL
FR
FL
Make sure that the terminals are connected to the bare wires
and not the insulation. Always match colored positive (+) termi-
nals together; and match black negative (-) terminals together. If
switched, the sound will be out of phase and will not be produced
correctly. Do not connect more than one wire to each speaker ter-
minal; do not connect one speaker to several terminals.
Page 20
Speaker
Subwoofer
Center
Surround Right
Surround Left
Front Right
Front Left
Coby Electronics Corporation
Color
Green
Red
Blue
Yellow
Gray
White