Stereo Line Input; Power Supply & Installation; Power Supply - Coby DVD968 Manuel D'instructions

Connections

Stereo Line Input

For use with an external playback
device with stereo audio output (e.g.,
a VCR, MP3, or CD player). Using an
optional RCA stereo audio patch cable:
1. Connect one end of the white and
red cables to the white and red Line
Input jacks of the unit (L, R).
2. Connect the other end of the cable
to the output jack(s) of an external
audio playback device.
After this connection has been made,
press <SOURCE> on the remote to
switch to "LINE" mode to enjoy audio
from the external device.
Depending on the type of patch cable used, you can use this
connection with external devices with a 3.5mm stereo output
jack or RCA stereo output jacks.
Please refer to the documentation included with your external
audio system for further help using this connection.
Power Supply & Installation

Power Supply

Plug the power cord of this unit into an AC 100-240V 50/60Hz wall outlet,
only. Make all video, speaker, and audio connections before con-
necting the power.
Page 22
Audio Output of Extra Devices
2-CH AUDIO OUTPUT
L R
L R
LINE IN
DVD Audio Input
Coby Electronics Corporation