Audio System; Speakers - Coby DVD938 Manuel D'instruction

Connections

Audio System

Choose the best available audio connection. Avoid using more than
one connection at the same time to prevent signal interference. The
audio settings of the unit must match the audio connection used.
Change the audio settings in the System Setup menu (please refer to
the System Setup section of this manual for more information).

Speakers

This unit has an integrated amplifier. Connect the supplied speakers to
enjoy your movies with 5.1-channel surround sound!
1. If necessary, strip 3/8" (10 mm) of insulation from each end of the
speaker wire.
2. While pressing the terminal levers of each speaker, insert the bare
wire into the hole, then release the lever to secure the connection.
www.cobyusa.com Page 19