Hayward ZRD Série Manuel D'installation page 8

Paragraph 5 – Setting the Alarm Relay
Programming
PROG
Pump Functions -­‐
Max flow rate
-­‐
P100%
Alarm Relay
-­‐
N.Open
Paragraph 6 – Power On Delay Setting
Programming
Paragraph 7 – Delay calibration Setting
Programming
Delay Calib.
Hayward Flow Control
This is used to set the alarm relay in the absence of an
alarm situation, if open (default) or closed.
Changes can be made by pressing the
the
-­‐
confirm and return to the main menu
+
-­‐
Allows the user to set a pump activation delay time when turning on
the pump itself. This delay will only take effect if the pump is turned
off and then on again by disconnecting its electrical power supply.
The setting can be disabled (Off - factory default) or else can be set
to a delay time ranging from 1 to 60 minutes.
The alarm and pulse LED indicators will flash while the delay time
is in progress (1 sec ON - 1 sec Off) and the countdown will be
shown on the display in seconds. If the pump is in Stop mode, the
LEDs alone will be flashing. While the time delay is in progress, the
function can be disabled by accessing the menu and setting the
time to Off.
Press
return to the main menu.
Used to set a pump operation delay after calibration of the probe
(Redox or pH).
The setting can be disabled (Off - factory default) or else can be set
to a delay time ranging from 1 to 60 minutes.
The alarm and pulse LED indicators will flash while the delay time
is in progress (1 sec ON - 1 sec Off) and the countdown will be
shown on the display in seconds. If the pump is in Stop mode, the
LEDs alone will be flashing. While the time delay is in progress, the
function can be disabled by accessing the menu and setting the
time to Off.
Press
return to the main menu.
www.haywardflowcontrol.com
Operation
keys to set the new value. Press
Operation
to access the modification option and use the
buttons to set the desired value. Press
Operation
to access the modification option and use the
buttons to set the desired value. Press
key, then using
to
to confirm and
to confirm and
1-888-INDL (1-888-429-4635)
ZRDIOM
Pg. 6 of 11
and
and