Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Be aware that the glue that join the plastic or wooden
material to the furniture, has to resist to temperature not
below 150℃, to avoid the unstuck of the paneling.
The rear wall, adjacent and surrounding surfaces must
therefore be able to withstand an temperature of 90℃.
9.2 Before installing the hob, make sure that
•
The work surface is square and level, and no structural members interfere
with space requirements.
•
The work surface is made of a heat-resistant and insulated material.
There are ventilation holes around outside of the
hob. YOU MUST ensure these holes are not blocked
by the worktop when you put the hob into position.
32
V.2
Publicité
Table des Matières
