Overmax X-Blast Manuel De L'utilisateur page 17

7. Description of controller functions:
• If you can see the car deviates to the left or right instead of going straight,
you can adjust the turn with toe-in adjustment on the controller. Keep
the front of the car in the air when using the adjustment (see fig. 7).
• To change the wheel turning angle, turn the wheels turning adjustment
knob (1) to the right to increase the angle, or to the left (2) to reduce the
angle. If you set the knob in „0" position, the car will not turn (see fig. 8).
• To adjust the speed, turn the throttling valve adjustment to the right (1)
and the maximum speed will be increased. Turn it left (2) to reduce the
maximum speed (see fig. 9).
8. How to clean and maintain
• Before you start cleaning, switch the device off and remove battery.
• Apply oil on all moving parts.
• Clean the car and controller with a wet cloth.
• Do not use chemicals to clean the device.
• After every use, remove sand and dust from the car. Make sure all
elements of the car are always dry.
• Remove the battery from the controller when you do not use it.
The pictures are for reference only. The real design of products may differ from
the pictures presented.
EN