Instruction Manual / International Warranty - Hindenberg Challenge 130-H Mode D'emploi

Instruction Manual
INITIAL SETTING
When setting the watch for the first time, wind the crown counter-clockwise at least 45 times.
WARNING: So as not to damage the mechanism, do not set the date/month etc. while
the hands are between 9am and 3pm (15:00) or between 9pm (21:00) and 3 am. Please
press the button on your watch slowly and carefully to avoid damaging the mecha-
nism. When the warranty of your watch expires, we recommend you to send it in for a
revision to ensure its longevity. A revision should optimally be conducted once a year
to counteract general wearout and to maintain the water-resistance of your watch.
SETTING THE YEAR AND THE MONTH
Pull the crown carefully out to position 1 (one click) and set the hands outside the zone
mentioned before, e.g. at 6:00. Open the protective lids of the pushers A and B and press the
adjustment pusher A until the right month is displayed. Press the adjustment pusher B until
the required year is displayed.
SETTING THE DAY OF THE WEEK AND THE DATE
Open the protective lids of the pushers C and D. Press the adjustment pusher C until the right
date is displayed (1 - 31). Press the adjustment pusher D until the required day is displayed.
Challenge
The date/month must be set manually at the end of the month.
Model-No.: 130-H
Automatic mouvement SETTING THE SECOND TIME ZONE AND THE TIME
Pull the crown carefully out to position 1. Turn the crown counter-clockwise to set the hands
calibre H-09.130
(hour) on the second time zone (2 displays in the middle). Now turn the crown clockwise to
20 jewels
set the current time. Then press the crown back in.
5