Instruction Manual / International Warranty - Hindenberg Independence 160-H Mode D'emploi

Instruction Manual
INITIAL SETTING
When setting the watch for the first time, wind the crown at least 45 times.
WARNING: So as not to damage the mechanism, do not set the date/month etc.
while the hands are between 9am and 3pm (15:00) or between 9pm (21:00) and 3 am.
Please press the button on your watch slowly and carefully to avoid damaging the
mechanism. When the warranty of your watch expires, we recommend you to send
it in for a revision to ensure its longevity. A revision should optimally be conducted
once a year to counteract general wearout and to maintain the water-resistance of
your watch.
SETTING THE DAY OF THE WEEK AND THE MONTH
Pull the crown carefully out to position 2 (two clicks) and set the hands outside the zone
mentioned before, e.g. at 6:00. Unscrew the crown of the pushers A and B by turning them
counter-clockwise. Press the adjustment pusher A until the required day is displayed. Press
the adjustment pusher B until the right month is displayed.
SETTING THE DATE
Push the crown back to position 1 (one click position) and turn it counterclockwise to the
Independence
date required. The date/month must be set manually at the end of the month.
Model-No.: 160-H
Automatic mouvement
SETTING THE TIME
Calibre H-09.160
Pull the crown carefully out to position 2. Turn the crown in either direction to set the cur-
20 jewels
rent time. The indicator in the middle (1 – 24) is the 24 hour display. Then press the crown
back in.
5