Instruction Manual / International Warranty - Hindenberg Conqueror 140-H Mode D'emploi

Instruction Manual
INITIAL SETTING
When setting the watch for the first time, unscrew the crown by turning it counter-clockwise and
wind it at least 45 times.
WARNING: So as not to damage the mechanism, do not set the date/month etc. while the
hands are between 9am and 3pm (15:00) or between 9pm (21:00) and 3 am. Please press
the button on your watch slowly and carefully to avoid damaging the mechanism. When
the warranty of your watch expires, we recommend you to send it in for a revision to
ensure its longevity. A revision should optimally be conducted once a year to counteract
general wearout and to maintain the water-resistance of your watch.
SETTING THE YEAR AND THE MONTH
Pull the crown carefully out to position 1 (one click) and set the hands outside the zone
mentioned before, e.g. at 6:00. Unscrew the crown of the pushers A and B by turning them
counter-clockwise. Press the adjustment pusher A until the right month is displayed. Press the
adjustment pusher B until the required year is displayed.
SETTING THE DAY OF THE WEEK AND THE DATE
Unscrew the crown of the pushers C and D by turning them counterclockwise.
Press the adjustment pusher C until the right date is displayed (1 – 31). Press the adjustment
Conqueror
pusher D until the required day is displayed. The date/month must be set manually at the end
Model-No.: 140-H
of the month.
Automatic mouvement
Calibre H-09.140
SETTING THE TIME
20 jewels Pull the crown carefully out to position 1. Turn the crown in either direction to set the current
time. Then press the crown back in and bolt it by turning it clockwise.
5