Instruction Manual / International Warranty - Hindenberg Overcast 300-H Mode D'emploi

Instruction Manual
INITIAL SETTING
When setting the watch for the first time, wind the crown at least 45 times.
WARNING: So as not to damage the mechanism, do not set the date/month etc.
while the hands are between 9am and 3pm (15:00) or between 9pm (21:00) and 3
am. Please press the button on your watch slowly and carefully to avoid damaging
the mechanism. When the warranty of your watch expires, we recommend you to
send it in for a revision to ensure its longevity. A revision should optimally be con-
ducted once a year to counteract general wearout and to maintain the water-re-
sistance of your watch.
SETTING THE DATE
Pull the crown carefully out to position 2 (two clicks) and set the hands outside
the zone mentioned before, e.g. at 6:00. Push the crown back to position 1 (one click
position) and turn it counterclockwise to the date required.
SETTING THE DAY OF THE WEEK AND MONTH
Press the adjustment pusher A until the right day is displayed. Press the adjustment
Overcast
pusher B until the required month is displayed. The date/month must be set manually at
Model-No.: 300-H
the end of the month.
Automatic mouvement
calibre H-09.120
SETTING THE TIME
20 jewels
Pull the crown carefully out to position 2. Turn the crown in either direction to set the
hands on the time required. Then press the crown back in.
5