Brink Renovent Excellent 400 Consignes D'installation page 73

Maintenance
9.2 Maintenance
Installer maintenance includes cleaning the heat exchanger
and fans. Dependent on the conditions, this must done about
once every three years.
1 Switch off the appliance on the control panel (Press the
key for 5 seconds; the appliance will be switched off
through software) and switch off the power.
3 Remove the move the front cover.
All manuals and user guides at all-guides.com
> 5 sec.
6284-A
6285-A
6289-A
Renovent Excellent
4 Remove the heat exchanger. Be careful not to damage the
foam parts in the appliance.
5 Rinse the exchanger with hot water (max. 55 ºC) and a
regular detergent. Rinse the exchanger with hot water.
6 Take off the display cover.
Note! First disconnect the connectors on the rear of the
display cover.
2 x
Chapter 9
6290-A
6291-A
6292A
25