Rehasense PIXEL Manuel De L'utilisateur page 23

6
Usage
Looking at the picture above the device should be prepared for use in an instinctive way.
However we recommend you follow the steps below:
Initial Check
- Take the device out of the box and check (using the picture above) that nothing is missing. If
you discover at this stage that some part is missing or damaged do not continue to assemble
the product. Contact your supplier of the product right away.
Opening of the rollator
- Hold the push handle in both hands in front of you so the rear wheels are on the
floor. Push it down so the frame opens all the way.
- Find the red frame locking button on the basket frame. Lock it on the main
frame until you hear a "click" sound of the locking mechanism.
- Try to pull the frame parts back up together to fold the frame. If this is
impossible to do the frame is opened and secured correctly. See the OPEN
position in the picture above.
•
After unfolding or assembling the rollator always ensure that the frame halves are securely
locked so that the frame does not move anymore.
•
Always ensure that push handle is securely locked in the main support tube with the two
locking knobs to prevent the accidental sliding in of the push handle tubes when forced.
•
Always test to see that accessories are properly and safely locked in place BEFORE using.
•
Failure to follow these warnings can result in personal injury.
Folding
- Push the red locking button which connects the basket frame with
the main frame.
- Lift the bag's frame to pull the main frame halves together and to
fold the rollator.
02/2022 23/50 PIXEL