CLAS OC 9123 Guide Rapide page 9

OC 9123
REAR PARKING SENSOR PUNCH TOOL KIT TOYOTA (5 PCS)
• Screw the punch on the drive unit's thread
(Figures 5+6).
6
• Use a 3/8" ratchet wrench and then a monkey wrench to lock the punch from the outside. The punch
is pulled into the bushing as it is screwed (Figures 7+8).
A clean hole is created in the bumper without burrs by working from the outside towards the inside
(Fig.9).
8
5
7
9