Hazard Warnings; Residual Risk - HOLZMANN MASCHINEN TFM610V Manuel D'utilisation


Before putting the machine into operation, check that the milling tool is firmly seated and
concentric!

Do not use damaged tools (milling cutters) and ensure that the maximum speed of the
milling cutter is above the maximum speed of the machine and that the shank diameter of
the milling cutter is within the limits specified for the machine.

When operating the machine, make sure that metal parts, screws, nails, etc. never gets in
contact with the cutter and if greater milling depths are requested use several stages for
producing to avoid damaging of the machine and tool.

Allow the machine to reach full speed and then immerse the cutter in the workpiece.

If the cutter is clogged with waste, stop the machine. Allow the cutter to run out
completely. Remove the waste with a longer rod and not with your fingers.

Allow the cutter to run out completely before removing the workpiece.

The milling must always be carried out against the direction of rotation (counter-rotation)
of the milling cutter.

12.6 Hazard Warnings

Despite their intended use, certain residual risks remain. Due to the structure and construction of
the machine, hazardous situations may occur when handling the machines.

12.6.1 Residual risk:

A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death..
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
HOLZMANN MASCHINEN GmbH
DANGER
WARNING
CAUTION
NOTICE
www.holzmann-maschinen.at
SAFETY
24
TFM610V