Bosch EL-52425 Notice Originale page 21

5. Operation
5.1 Alignment
i
The specific values for the exact alignment of the
EL–52425 described in the car manufacturer's "Re-
pair instructions".
Fig. 7: View of front plumb bob
Fig. 8: View of side plumb bob
Robert Bosch GmbH
All manuals and user guides at all-guides.com
5.2
1. Make the floor markings using the plumb bob on the
2. Mark the floor for alignment. Position the EL–52425
3. Center the EL–52425 between the left (F) and right
4. At the same time, slowly move the base frame until
Fig. 9:
x
Operation | EL–52425 | 21
Alignment example
vehicle and then align the EL–52425 accordingly.
in front of the vehicle.
(E) marking on the floor, using the inspection glass
in the base frame as reference.
the two pointers in the base plate opening point to
the line G-H.
View of front left plumb bob
en en
|
1 690 386 081 2018-02-22