Wella Professionals xpert HS 71 Mode D'emploi page 38

Xpert.book Seite 36 Mittwoch, 14. November 2012 11:20 11
NOTE:
Do not pull the wires. When disconnecting the battery, grasp
the connector itself.
3. Remove the old rechargeable battery
from the appliance and carefully detach
the mini plug by pulling upwards.
CAUTION:
When there is no rechargeable battery in the appliance, do not con-
nect the appliance to the power cord 11 or place it in the charging
unit 8 that is connected to the mains. Either action can damage the
electronic system.
4. Carefully insert the mini plug of the new
rechargeable battery into the appliance
so that it fits into the appropriate socket.
5. Insert the new rechargeable battery, slide
the cover back onto the appliance, and
screw up the securing screw.
36 ENGLISH
All manuals and user guides at all-guides.com
6 What should I do if ...
... the appliance will not switch on?
– Is the function lock activated? Place the appliance in the con-
– Is the battery low? Charge up the Xpert in the charging unit or
– Charging the appliance at high ambient temperatures
... the blade head "sticks"?
– The blade head must be cleaned and oiled. Proceed as
... none of the charging indicator segments lights up?
– Clean the charging contacts.
– The appliance may not be positioned correctly in the charging
– The power cord may not be properly connected.
nected charging unit to deactivate the function lock.
work with mains power (power cord plugged directly into
appliance).
(> +35 °C) may trigger the safety cutout, which temporarily
stops the appliance working. Let the appliance cool down for
5 - 10 minutes. Then the appliance is ready for operation
again.
described on page 34.
unit. Position it correctly.