Cleaning And Care - Wella Professionals xpert HS 71 Mode D'emploi

Xpert.book Seite 34 Mittwoch, 14. November 2012 11:20 11
1. Switch off the Xpert and push the desired comb attachment onto
the blade head 4.
2. You can now start trimming hair with the Xpert in the usual way.

4 Cleaning and care

CAUTION:
To ensure proper functioning of the appliance, the blade head must
be cleaned regularly and oiled in the appropriate places. Failure to
clean the blade head regularly results in excessive wear on blade
head and motor.
Cleaning the blade head
If used regularly, the blade head 4 should be thoroughly cleaned
once a day.
1. Switch the appliance off.
2. Press downwards on the blade head (see
illustration) and remove it from the appli-
ance.
3. Carefully remove the hairs with the clean-
ing brush 13.
34 ENGLISH
All manuals and user guides at all-guides.com
NOTE: You can use the cutting length adjustment lever 5 to move
the upper and lower blades apart.
Oiling the blade head
4. Push the upper and lower blades slightly
apart (see illustration) and use the clean-
ing brush to remove any hairs between
them.
The blade head 4 must be oiled regularly (pref-
erably daily).
1. Remove the blade head.
2. Oil the positions where the top and bot-
tom cutting blades meet (see illustration).
3. Run the Xpert for about 20 seconds to
ensure that the oil is properly distributed.
- You can carry on working with it while
doing so.