Dishwasher Connection; Electrical Connection & Grounding - Westinghouse 1314311 Manuel De L'utilisateur

Installation (continued)
Turn the bottom supporting ring 1/3 of a turn counter-clockwise
and repeat the mounting procedure described above (see Fig 13c) .
- Connect the bottom of the elbow to the trap by tightening the
slip nut (Fig . 14) .
- Run water and check all connections for leaks .

DISHWASHER CONNECTION

- Connect the dishwasher hose (see Fig . 15) using a hose clamp .
Make sure all plumbing connections are tight . Run water and
check for leaks .
*Air Gap may not be required for all installations, verify your
local plumbing codes .
ELECTRICAL CONNECTION & GROUNDING
- Connect the disposer to the appropriate household current only .
- This appliance must be grounded . In the event of a malfunction
or breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock . This
appliance is equipped with a cord having an equipment-
grounding conductor and a grounding plug . The plug, supplied
with this unit, must be connected to an appropriate outlet that
is properly installed, switched and grounded in accordance
with all local codes and ordinances . If the supply cord is
damaged it must be replaced by the manufacturer or a
qualified person in order to avoid a hazard.
All manuals and user guides at all-guides.com
9
Please contact customer.service@conglomkb.com or 1-877-333-0098 for further assistance .
1/3 turn
Fig. 13c
Fig . 14
* Air Gap
Rubber Hose
Dishwasher Hose
Drain
Disposer
Fig . 15
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock .
Check with a qualified electrician or serviceman if you
are not sure . Do not modify the plug provided with the
appliance if it does not fit the outlet. Have a proper outlet
installed by a qualified electrician.
NOTE: The waste disposer plug provided needs to be
controlled by an on/off switch (usually wall-mounted) .
CONGLOMKB .COM