Operation Guidance For Disk Cleaning - CASO DESIGN 1510 Mode D'emploi Original

14.3 Operating Instructions

14.4 Operation guidance for disk cleaning

Open the lid, and fill the stainless steel tank with water.
Attention
Running without water may damage the unit!
Place the item into the water. The item should be immerged well
into water.
However, do not exceed the "MAX" mark.
Close the lid and plug in the appliance.
Press the ON button to start the cleaning process – the red
indication light turns on.
Note
During cleaning, you can hear the ZIZI sound; it means the unit
is working
The unit will stop automatically after 3 minutes. If another cleaning is
needed, press the ON button again.
You can press the OFF button during the cleaning if you want to
stop it.
When the cleaning is finished, unplug the unit and open the lid. Take
out the item. At last, pour the water from the stainless steel tank and
wipe it out.
36