Polar CG582 Mode D'emploi page 4

UK
Operation
Turn On (G619/G211/CB507/DP288)
Close the doors of the appliance.
1.
Connect the appliance to a mains power supply.
2.
Press the button to turn the light On or Off as required.
3.
Set the Operating Temperature
Press the button. The display will flash.
1.
Press the or
2.
Press the button to store the temperature..
3.
Turn On (CB509/DP289/CG582 )
The control panel for the CB509/DP289/CG582 is located on the front of the appliance.
Close the door of the appliance.
1.
Connect the appliance to a mains power supply.
2.
Turn the light On or Off by pressing the
3.
To set the temperature
Press the button and hold for 7 seconds. The display will display 'on'.
1.
Press the button for 3 seconds. The display will display 'E1'
2.
Press twice. The display will display E3.
3.
Use the and
4.
Press the button and hold for 7 seconds. The display will display 'off' and new temperature setting
5.
will be stored.
3
All manuals and user guides at all-guides.com
buttons to display the required temperature.
button.
button adjust the set temperature to store the temperature.
SET