Electrical Wiring; Technical Specifications - Polar CG582 Mode D'emploi

UK
Fault
The appliance turns Appliance is overloaded
on, but the
temperature is too
high/low
The appliance is The appliance is not properly
leaking water levelled
The discharge outlet is blocked Clear the discharge outlet
Movement of water to the drain
is obstructed
The water container is
damaged
The appliance is The frame has become loose
unusually loud
The appliance has not been
installed in a level or stable
position

Electrical Wiring

POLAR appliances are supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as
standard.
The plug is to be connected to a suitable mains socket.
POLAR appliances are wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
All POLAR appliances must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.

Technical Specifications

Model Voltage Power
G619 230V 180W
G211 50Hz
CB507 230V 180W
DP288 50Hz
CB509 230V 250W
DP289 50Hz
CG582 230V 210W
50Hz
5
All manuals and user guides at all-guides.com
Probable Cause
Reduce the amount of food stored in the appliance
Adjust the screw feet to level the appliance (if applicable)
Clear the floor of the appliance (if applicable)
Call POLAR agent or qualified Technician
Check and tighten all nuts and screws
Check installation position and change if necessary
Temperature
Current
Range
1.2A 2°C to 12°C
1.2A 2°C to 12°C
1.5A 2°C to 12°C
1.35A 2°C to 12°C
Action
Capacity
Refrigerant
(litres) H x W x D (mm)
70 R600a 40g
86 R600a 40g
235 R600a 100g 1695 x 515 x 485
100 R600a 50g 1100 x 565 x 565
Dimensions Weight
(kg)
885 x 428 x 386 32.5
980 x 428 x 429 36,5
76.4
50