Getting Started - DNT MusicFly SD Mode D'emploi

All manuals and user guides at all-guides.com

Getting started

Getting started
When you use MusicFly SD with portable audio device
(MP3 player, CD player, portable DVD player, or mobile
phone etc.) MusicFly SD lets you listen to your portable
audio device (MP3 player, CD player, portable DVD player,
or mobile phone etc.) through any FM radio.
Automatically power is on once you put MusicFly SD into
the car cigarette lighter power adapter.
You can also power on by pressing the MEM SD-USB
button for about 2 seconds. If no audio signal is detected for
1 hour, power is automatically off.
Turn on the radio and fi nd a frequency that is not being
used for broadcasting. Match the frequency of MusicFly SD
on your radio using up/down button.
Select a frequency which sounds clear, makes less
background noise than other radio stations.
Connect portable audio device(MP3P, CDP, PMP, PDA,
navigation or mobile phone etc.) to MusicFly SD with stereo
cable.
Turn on the audio device and press the play button.
Set the volume to a reasonable level to get the best signal
quality. Set the volume of the audio device to medium level
and control the delicate volume using radio volume.
When you use MusicFly SD with portable memory device
(USB storage, memory card or portable hard disk) you can
listen to sound fi les like MP3, WMA in USB storage, through
any FM radio.
Plug USB storage into the USB port at the bottom of
MusicFly, then MP3 or WMA fi les are played automatically
stored in the USB storage.
Support only MP3 and WMA fi le, the other fi le types and the
fi les locked by DRM are not played.
Using USB storage
Recognizee up to 32GByte, 1999 fi les. Supports directory
loading up to 5-level depth, max 50 directories.
MFlysdDEF.indd 24 MFlysdDEF.indd 24
- 24 -
19.05.2008 16:43:16 19.05.2008 16:43:16