Fenton RP173 Manuel D'instructions page 5

BT CONNECTION
1. Select BT mode by turning the function knob to BT. The BT LED indicator will flash in blue color.
Turn on your external BT device to pair with the unit. Go to your device's BT menu and select "Fenton recordplayer" to
2.
connect the unit. Once connected, the blue LED light will stop flashing.
3. To select the volume level, either turn the volume control knob to adjust the volume or adjust from your BT connected
device.
Noted: This device does not have a BT transmitter, this means that it is not possible to send sound via BT to, for example, a BT
speaker
when the unit is used as a bt speaker, all other playback functions cannot be used at the same time.
RCA OUTPUT MODE
Connect your own speaker system to the RCA port of the record player with an RCA-3.5mm audio cable (not included).
NOTE: the RCA cables are color coded. The red plug cable must be plugged into the red connector on both the record player
and external amplifier or speaker system. The white plug cable must be plugged into the white connector on both the record
player and external amplifier or speaker system.
CONNECTING WITH COMPUTER
Before you connect the turntable to a computer, unplug it from your mixer or Hi-Fi system. The included software is a third party
application and therefore Fenton does not handle any questions or problems regarding the software.
1. Turn the computer on
2. If the computer is booted, connect the turntable. The computer will now install the drivers.
3. After the drivers are installed, you must now install the Audacity software.
Windows users: insert the CD or download the newest software via http://audacity.sourceforge.net
MAC users: download the newest software via http://audacity.sourceforge.net
To Install Software (PC)
1. Plug in your turntable to an power supply and connect the USB port on the Turntable to the USB port of your computer.
2. Turn on the power switch to your turntable.
3. The Windows system will detect a new device and indicate that it is available to use.
4. Insert the CD that came with your USB turntable.
5. Run the file to install the Audacity software. Once installed, run the Audacity program.
To Install Software (MAC)
1) Insert the included CD.
2) Open the CD icon on the desktop.
3) Drag the installation folder for audacity to your hard drive. We recommend that you move the folder to your "Applications"
folder.
4) A window will come up which shows the files copying.
5) EJECT the CD.
6) Open "Audacity" from where you moved it to on your hard drive.
5