Accessories; Protecting The Environment - ACDelco ARI1265 Manuel Informations Du Produit

INSTALL THE METAL HOOK
Before install the metal hook, follow the procedure as shown below.
1. Remove the cover behind the motor by hand.
2. Align the holes of metal hook to the tool housing.
3. Use screws to fasten the metal hook to the tool housing.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Recommended accessories for use with your tool are available at extra cost from your
local service center.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments should be performed by certified service centers or other qualified
service organizations, always using identical replacement parts.
Before disposing of damaged, check with your state Environmental Protection Agency
to find out about special restrictions on the disposal of tool or return them to a certified
service center for recycling.
ACDelco, ACDelco Emblem and the ACDelco related graphics are General Motors
Trademarks used under license to Mobiletron Electronics Co., Ltd.
All manuals and user guides at all-guides.com
1English1

ACCESSORIES

PROTECTING THE ENVIRONMENT

English
Cover
-11
Metal Hook
Screws