Programmed Playback - Teac SL-D900 Manuel Du Propriétaire

3 4
2
Up to 64 tracks can be programmed in the desired
order.
Shuffle and Repeat functions don't work during

programmed playback.

1 Press the FUNCTION button to select "CD" or
"CARD-USB".
2
Press the MEMORY button.
"MEMORY" lights up in the display.
< To cancel the program mode, press the Stop button
(H).
18
All manuals and user guides at all-guides.com
Programmed Playback
1
5
3
Press the numeric buttons (or press the Skip
button (.//) repeatedly) to select a folder
on a MP3 disc or USB memory card, then press
the MEMORY button.
< MP3 tracks recorded out of folders are in the "01"
(ROOT) folder.
< Skip this step when playing a CD.
4
Press the numeric buttons (or press the Skip
button (.or/) repeatedly) to select a track,
then press the MEMORY button.
The track is programmed, and "P-02" is displayed.
3 4
< Repeat steps and to program more tracks.
< You can program up to 64 tracks.
5
When the selection of track numbers is
completed, press the Play/Pause button (G/J)
to start program playback.
< When the playback of all the programmed tracks has
finished, or if one of the following buttons is pressed,
the MEMORY indicator will go off and the program
mode will be cancelled:
STOP, FUNCTION, STANDBY/ON
The program is retained in memory until the you
open the disc compartment cover or the power is
interrupted. You can return to the programmed
playback by pressing the MEMORY button and the
Play/Pause button (G/J). (If another source was
selected, select the CD or the CARD-USB mode by
pressing the FUNCTION button beforehand.)