Contents Of Carton - MTD OEM-190-180A Manuel De L'utilisateur

Thank You
Thank you for purchasing a bagging attachment. It was carefully engineered to provide excellent performance when properly operated and maintained.
Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your equipment. Please be sure that you, and any other
persons who will operate the machine, carefully follow the recommended safety practices at all times. Failure to do so could result in personal injury or property damage.
All information in this manual is relative to the most recent product information available at the time of printing. Review this manual frequently to familiarize yourself with the equipment,
its features and operation. Please be aware that this Operator's Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or
illustrated in this manual may not be applicable to all models. We reserve the right to change product specifications, designs and equipment without notice and without incurring obligation.
If you have any problems or questions concerning this equipment, phone your local dealer or contact us directly. We want to ensure your complete satisfaction at all times.
Throughout this manual, all references to
List of Carton Contents - OEM-190-180A
Before beginning installation, remove all parts from the carton to make sure everything is
present. Carton contents are listed and shown below. The hardware packs included in these
kits are detailed on this page and illustrated on the following page.
• Rider Hitch Bracket Assy. – 689-00304A
• Universal Support Bracket – 783-08129
• 700 Series Mount Kit – 689-00086A
• Chute Tube Extension – 731-06610
• Discharge Chute Elbow – 731-04153A
• Bagger Cover Screen – 731-06504
• Bagger Cover – 631-04292
• Grass Bag Assemblies (2) – 664-05104
• Upper Chute Tube – 631-04291A
• Upper Chute Support – 731-06497

CONTENTS OF CARTON

right left
and side of the machine are observed from the operating position.
• Self-Adhesive Foam Strip – 721-04388
• Hinge Pin – 711-04988
• End Plugs (4) – 735-0246A (pre-installed)
• Vertical Bagger Support – 683-04519C
• Hanger Assembly – 683-04461C
• Hardware Pack – 689-02201
• Hardware Pack – 689-02364
Carton Contents Illustration
List of Carton Contents - OEM-190-182A
Before beginning installation, remove all parts from the carton to make sure everything is
present. Carton contents are listed and shown below. The hardware packs included in these
kits are detailed on this page and illustrated on the following page.
• Rider Hitch Bracket Assy. – 689-00304A
• Universal Support Bracket – 783-08129
• 700 Series Mount Kit - 689-00086A
• Chute Tube Extension – 731-06611
• Discharge Chute Elbow – 731-04159A
• Bagger Cover Screen – 731-06504
• Bagger Cover – 631-04292
• Grass Bag Assemblies (2) – 664-05104
• Upper Chute Tube – 631-04291A
• Upper Chute Support – 731-06497
700 Series Mounting Kit
(Includes the following parts)
•
•
•
•
•
•
•
Only Used with
OEM-190-182A
4
• Self-Adhesive Foam Strip – 721-04388
• Hinge Pin – 711-04988
• End Plugs (4) – 735-0246A (pre-installed)
• Vertical Bagger Support – 683-04519C
• Hanger Assembly – 683-04461C
• Cutting Blades (2) – 742-0644
• Cutting Blade (1) – 742-0645
• Hardware Pack – 689-02201
• Hardware Pack – 689-02364
RH Bracket – 783-05889A
LH Bracket – 783-05890A
Shoulder Bolts – 738-04267 (2)
Hex Bolts – 710-04484 (4)
Flange Lock Nuts – 712-04065 (2)
Clevis Pins – 711-0332 (2)
Cotter Pins – 714-0145 (2)