ARENDO 304957 Mode D'emploi page 24

4. Usage and function
Turn on the appliance by pressing the "ON/OFF/TARE" button briefly. Press and
hold the "ON/OFF/TARE" button for about 3-4 seconds to switch off the appli-
ance. Place the kitchen scale on a flat and level surface.
Place the object to be weighed at the centre of the scales. The weight is shown
on the display after a few seconds. Now wait until the weight shown in the display
stabilises.
5. Tare function
The "ON/OFF/TARE" function resets the current reading to "0". For example, if
you want to weigh food items that are in a bowl, you can first place the bowl on
the scale and then press the "ON/OFF/TARE" button. The scales automatically
deducts the weight of the bowl.
If you now place the food item in the bowl and place the bowl on the scales, you
will see only the weight of the food item.
6. Changing the units
By pressing the "Unit" button, you can choose between the following units:
g= gram (if the weight exceeds 1000g, it automatically switches to kg= kilogram),
lb:oz= pounds and ounces, ml = milliliter, fl:oz = liquid ounce
7. Replacing the batteries
① Open the battery compartment at the back of the appliance.
② Insert two 1.5V AAA batteries into the battery compartment. Pay attention to
the correct polarity (+/-).
③ Close the battery compartment by replacing the battery compartment cover
until it snaps into place.
④ If the display light becomes dim or "Lo" is shown in the display, then the
batteries have to be replaced.
24
English