CLAS B.LINE OP 0046BL Mode D'emploi page 5

OP 0046BL
INTRODUCTION
Thank you for selection our tire infl ating gun (OP 0046BL), please read this manual before carrying out
any operation.
This manual is an integral and essential part of the product, please keep it away from damp, heat, dust,
oils, do not remove, tear or amend any parts of the manual for any reason. It must be made available to
the operator and to maintenance personnel, also to ensure staff training.
If case of loose or damage, ask the manufacturer for a copy, quoting the manual code. The manual must
always remain with the machine, in the event of the machine being sold, it must be given to the new
user.
The manufacturer reserves the right to change product features at any time.
DESCRIPTION
3
2
OPERATION
Note: To operate this tool, an air compressor or clean pressurized air is required.
WARNING:
• Ensure the air supply pressure does not exceed the maximum operating pressure stated in
'Specifi cation'.
• Be aware that air tools may hold residual pressure after use. Always bleed air pressure from the
tool after shutting off air supply.
INFLATING GUN 0-12bar
4
5
1
Art n° Designations
1 Air Chuck
2 Tyre conector Hose
3 Pressure Gauge
4 Air Release valve
5 Air Trigger